![](http://img.jcwcn.com/attachment/portal/2007-1/11/59679/40.jpg)
[next]在下面的作品中我们将看到三维素材在平面设计中的出色表现。
新建640×960像素大小的文件,选择渐变工具,然后在背景上绘制如图效果渐变。
![](http://img.jcwcn.com/attachment/portal/2007-1/11/59679/01.jpg)
新建图层1,设置前景色颜色值为877669,然后绘制如图两个矩形,并设置不透明度为50%。
![](http://img.jcwcn.com/attachment/portal/2007-1/11/59679/02.jpg)
[next]按“Ctrl+T”打开自由变换命令,调节图层1到如图效果。
![](http://img.jcwcn.com/attachment/portal/2007-1/11/59679/03.jpg)
选择钢笔工具,绘制如图路径。新建图层2,将路径转换为选区,设置前景色为黄色(cca865)填充选区,将混合模式设置为“叠加”,不透明度为60%。
![](http://img.jcwcn.com/attachment/portal/2007-1/11/59679/04.jpg)
[next]复制图层2得到图层2副本,选择“编辑”→“变换”→“水平翻转”和“垂直翻转”,然后使用移动工具将它移动到如图位置。
![](http://img.jcwcn.com/attachment/portal/2007-1/11/59679/05.jpg)
新建路径2,绘制如图路径。
![](http://img.jcwcn.com/attachment/portal/2007-1/11/59679/06.jpg)
[next]新建图层3,将路径转换为选区,设置前景色为黄色(cca865)填充选区,将混合模式设置为“叠加”,不透明度为60%。
![](http://img.jcwcn.com/attachment/portal/2007-1/11/59679/07.jpg)
复制图层3得到图层3副本,选择“编辑”→“变换”→“水平翻转”和“垂直翻转”,然后使用移动工具将它移动到如图位置。
![](http://img.jcwcn.com/attachment/portal/2007-1/11/59679/08.jpg)
[next]
新建路径3,绘制如图路径
![](http://img.jcwcn.com/attachment/portal/2007-1/11/59679/09.jpg)
新建图层4,将路径转换为选区,设置前景色为米色(e7e2d1),填充选区,设置不透明度为30%,混合模式为“颜色减淡”。
![](http://img.jcwcn.com/attachment/portal/2007-1/11/59679/10.jpg)
![](http://img.jcwcn.com/attachment/portal/2007-1/11/59679/11.jpg)
新建47×47像素的透明背景文件,然后在中间绘制一个黑色正圆。
![](http://img.jcwcn.com/attachment/portal/2007-1/11/59679/12.jpg)
[next]
选择橡皮工具,使用31像素的笔头将正圆的中间部分擦去。
![](http://img.jcwcn.com/attachment/portal/2007-1/11/59679/13.jpg)
选择“编辑”→“定义画笔预设”命令,单击确定。
![](http://img.jcwcn.com/attachment/portal/2007-1/11/59679/14.jpg)
[next]新建图层5,选择画笔工具,如图设置画笔。
![](http://img.jcwcn.com/attachment/portal/2007-1/11/59679/15.jpg)
![](http://img.jcwcn.com/attachment/portal/2007-1/11/59679/16.jpg)
![](http://img.jcwcn.com/attachment/portal/2007-1/11/59679/17.jpg)
[next]设置前景色为灰色(8b7e73),然后使用画笔在左下角涂抹。
![](http://img.jcwcn.com/attachment/portal/2007-1/11/59679/18.jpg)
设置前景色为灰色(6a625c),使用不同大小的硬边画笔绘制如图一些圆点。
![](http://img.jcwcn.com/attachment/portal/2007-1/11/59679/19.jpg)
[next]单击“添加图层样式”按钮,选择“投影”命令,如图设置参数。
![](http://img.jcwcn.com/attachment/portal/2007-1/11/59679/20.jpg)
新建图层7,设置前景色为米色(f6ecd1),使用不同大小的硬边画笔绘制如图一些圆点。
![](http://img.jcwcn.com/attachment/portal/2007-1/11/59679/21.jpg)
[next]新建图层8,设置前景色为米色(dddad3),使用刚才我们制作的圆环笔刷,如图绘制一些圆圈。
![](http://img.jcwcn.com/attachment/portal/2007-1/11/59679/22.jpg)
新建图层9,设置前景色为灰色(c9c5bc),选择直线工具,设置粗细为2,在图中绘制一些直线。(黑色的图层10,在制作过程中是不需要的,是为了让大家看清图层9中的线条而建的)