![](http://img.jcwcn.com/attachment/portal/2007-1/15/12359/42.jpg)
[next]
用photoshop模拟各类材质对于设计师来说都是一个很有挑战,很有乐趣的工作,下面我们将在同一个作品中真实的模拟出钢和宝石两种材质。
新建1200×900像素的文件,设置前景色为灰色(777676)填充背景。执行“滤镜”→“杂色”→“添加杂色”,设置数量为50%,高斯分布,勾选单色复选框。
![](http://img.jcwcn.com/attachment/portal/2007-1/15/12359/01.jpg)
接着执行“滤镜”→“模糊”→“径向模糊”命令,设置数量为100,模糊方式为旋转,品质为好。按“Ctrl+F”两次,重复执行径向模糊。
![](http://img.jcwcn.com/attachment/portal/2007-1/15/12359/02.jpg)
[next]
执行“滤镜”→“锐化”→“USM锐化”命令,设置数量为500%,半径为0.6。
![](http://img.jcwcn.com/attachment/portal/2007-1/15/12359/03.jpg)
新建图层1,设置前景色为黑色,背景色为白色,然后用黑色填充图层1。执行“滤镜”→“渲染”→“云彩”命令,得到如图效果。
![](http://img.jcwcn.com/attachment/portal/2007-1/15/12359/04.jpg)
[next]
执行“滤镜”→“模糊”→“高斯模糊”命令,设置半径为30。
![](http://img.jcwcn.com/attachment/portal/2007-1/15/12359/05.jpg)
接着执行“图像”→“调整”→“自动色阶”命令。
![](http://img.jcwcn.com/attachment/portal/2007-1/15/12359/06.jpg)
[next]
执行“滤镜”→“模糊”→“动感模糊”命令。设置角度为45度,距离为750像素。
![](http://img.jcwcn.com/attachment/portal/2007-1/15/12359/07.jpg)
设置图层1混合模式为“颜色减淡”,填充值为65%。
![](http://img.jcwcn.com/attachment/portal/2007-1/15/12359/08.jpg)
[next]
单击“创建新的填充或调整图层”,在菜单中选择“色阶”命令,如图设置对话框。按“Ctrl+Alt+G”执行“创建剪贴蒙版”。
![](http://img.jcwcn.com/attachment/portal/2007-1/15/12359/09.jpg)
单击“创建新的填充或调整图层”,在菜单中选择“曲线”命令,如图设置对话框。
![](http://img.jcwcn.com/attachment/portal/2007-1/15/12359/10.jpg)
![](http://img.jcwcn.com/attachment/portal/2007-1/15/12359/11.jpg)
![](http://img.jcwcn.com/attachment/portal/2007-1/15/12359/12.jpg)
[next]
设置前景色为黑色,选择椭圆工具,绘制如图正圆。
![](http://img.jcwcn.com/attachment/portal/2007-1/15/12359/13.jpg)
选择矩形工具,在正圆上方绘制一个矩形。按“Ctrl+T”打开自由变换命令,将中心点移至辅助线上。
![](http://img.jcwcn.com/attachment/portal/2007-1/15/12359/14.jpg)
[next]
应用自由变换控制框将形状顺时针旋转15度,按“回车”键确认。连续按“Ctrl+Shift+Alt+T”执行“连续变换并复制”命令,得到如图效果。
![](http://img.jcwcn.com/attachment/portal/2007-1/15/12359/15.jpg)
单击“添加图层样式”按钮选择“内阴影”命令,如图设置对话框。
![](http://img.jcwcn.com/attachment/portal/2007-1/15/12359/16.jpg)
[next]
单击“添加图层样式”按钮选择“斜面和浮雕”命令,如图设置对话框。
![](http://img.jcwcn.com/attachment/portal/2007-1/15/12359/17.jpg)
设置形状1图层不透明度为50%。
![](http://img.jcwcn.com/attachment/portal/2007-1/15/12359/18.jpg)
[next]
我们找一张水泥墙面的素材,来制作钢的磨损痕迹。
![](http://img.jcwcn.com/attachment/portal/2007-1/15/12359/19.jpg)
设置图层2的混合模式为“柔光”,现在钢的磨损效果出来了。
![](http://img.jcwcn.com/attachment/portal/2007-1/15/12359/20.jpg)
[next]
新建图层3,使用椭圆选框工具绘制如图路径。填充灰色(556477)。